Simulate granular flow before you build the equipment
BrixDEM is a discrete element method (DEM) simulation software that reproduces — particle by particle — the behavior of powders, grains and ores in bucket-wheel reclaimers, mixers, rotary drums, chutes and conveyors.
APPLIED IN BULK SOLIDS HANDLING ENGINEERING
The equipment you design, simulated particle by particle
Anticipate segregation, blockages, wear and mixing times without physical prototypes.
Bucket-wheel reclaimer
Bucket filling, wheel forces and wear in stockpile reclaiming.
Mixers
Homogeneity, mixing time and segregation by size and density.
Rotary drums
Cascading regimes, grinding charges and liners.
Transfer chutes
Trajectories, impact points and wear at transfer points.
Conveyors
Belts and screws: loading, drag, spillage and fines generation.
Your geometry
Draw it in Sketch or import CAD and simulate any granular equipment.
Every particle is solved individually
DEM treats bulk material as what it really is: thousands of particles that collide, slide and roll. Instead of empirical correlations, you get the real field of forces, velocities and stresses.
- Normal and tangential contact solved from first-principles physics.
- Sliding and rolling friction calibrated per material.
- Cohesion, restitution and stiffness tuned to your powder or ore.
- Quantitative results: throughput, wall forces, wear and segregation.
A modern solver, ready for industrial engineering
Proven contact models, built-in geometry modeling and high-end performance.
Contact models
Hertz–Mindlin and Linear Spring–Dashpot, with sliding and rolling friction per material pair.
GPU acceleration
Optional CUDA backend to simulate millions of particles in viable engineering times.
Parallel multicore
Parallel solver that uses every CPU core for large models.
Geometry sketch
Built-in parametric 2D→3D modeler: lines, arcs, booleans and patterns, no external CAD.
Import & cleanup
Import CAD/meshes, clean and repair geometry and inspect before simulating.
Multi-sphere particles
Clumps with a real shape: ready-made types or geometry from STL, with calibration and wear.
Automatic calibration
Calibrate restitution and friction via rebound, inclined plane and angle-of-repose tests.
Free body (6-DOF)
Parts that move from the material forces, in six degrees of freedom, beyond prescribed motion.
Wear (abrasion + impact)
Wear maps on the mesh via the Archard and Oka models, with per-material-pair coefficients.
Ready to simulate your first equipment?
Download BrixDEM for free and run your first simulation today, or talk to our team about your case.