BrixDEM industrial applications
Wherever bulk solids flow, mix, fall or are conveyed, DEM reveals what happens inside the equipment.
Bucket-wheel reclaimer
Reclaim material from stockpiles with predicted bucket filling, flow and wear.
- Bucket filling and discharge along the rotation.
- Forces and torque on the wheel and boom.
- Wear of buckets, teeth and liners.
- Fines generation, spillage and carry-back.
Mixers
Assess mixing homogeneity and segregation without a physical test bench.
- Mixing index and time to homogeneity.
- Segregation by size and by density.
- Comparison of blade geometries and rotation speeds.
- Power draw and regions of low material renewal.
Rotary drums
From cascading to cataracting: understand the charge motion regime.
- Rolling, cascading and cataracting regimes.
- Grinding charge distribution and residence time.
- Wear of liners and lifters.
- Influence of fill level and rotation speed.
Transfer chutes
- Material trajectory and impact points.
- Localized wear on walls and impact plates.
- Dust generation and spillage.
- Geometry optimization for centered flow.
Conveyors
- Belts: loading, profile and spillage.
- Screw conveyors: drag and fill.
- Fines generation and particle carry-back.
- Loading and discharge points.
Bucket elevator
Simulate bucket filling, lifting and discharge — and where material escapes.
- Filling at the boot and material scooping.
- Discharge trajectory at the head (centrifugal vs. gravity).
- Material carry-back and spillage.
- Effect of belt speed and bucket geometry.
Other simulated equipment
Cases run in BrixDEM, the same way you would with your own equipment.
Rotary valve
Pocket filling, dosing throughput, rotor torque and liner wear.
Paddle mixer
Paddle motion, mixture homogeneity and shaft power.
Ribbon mixer
Mixing of different materials, with quality index and size segregation.
V-blender
Tumbling mixing, homogenization time and low-circulation zones.
Drag chain conveyor
Drag by chain flights, trough filling and residence time.
Sectors already using DEM every day
Discrete element simulation is standard in any sector that processes bulk material.
Mining & mineral
Crushing, screening, stockpiles and transfers.
Cement
Grinding, silos and clinker handling.
Steel
Pellets, sinter and furnace charging.
Agriculture
Grains, seeds and fertilizers.
Food
Powders, cereals and processing.
Pharma
Tablets, granules and capsules.
Oil & gas
Catalysts and proppants.
Heavy equipment
Buckets, excavation and off-road.
Have a specific equipment in mind?
Draw it in Sketch or import your CAD geometry and simulate in BrixDEM, or talk to our team about your case.