Home · Product · Features

Inside the DEM solver

Proven contact physics, built-in geometry modeling and the performance an engineering team needs to trust the result.

Contact models

Hertz–Mindlin and Linear Spring–Dashpot

Choose the contact model that fits your material and engineering goal. Both solve the normal and tangential interaction between particles and between particle and wall.

  • Hertz–Mindlin: non-linear contact based on elastic contact theory, the default for most granular materials.
  • Linear Spring–Dashpot: automatic linear stiffness from overlap, ideal for quick studies and calibration.
  • Restitution, sliding friction and rolling friction defined per material pair.
  • Rolling resistance: elastic–plastic (EPSD) and viscous models, with consistently bounded torque.
  • Twisting resistance: Marshall formulation — a single, validated implementation.
  • Toggleable cohesion for fine powders and wet materials: enable it only when the material needs it and its cost leaves the solver.
  • Coarse-graining: particles larger than the real ones with scaled parameters, for industrial-scale equipment.
ParameterExample (sand)
Density2,600 kg/m³
Young's modulus1×10⁹ Pa
Poisson's ratio0.22
Restitution (e)0.8
Sliding frictionconfigurable
Rolling frictionconfigurable
Particle radius0.005 m
Particles

Clumps: particles with a real shape

Real grains are not spheres. A multi-sphere particle is a rigid assembly of spheres that approximates the shape of the material, bringing interlocking between particles, rolling resistance from geometry and packing closer to reality.

  • Predefined types: ready-made shapes so you can start without building anything from scratch.
  • Shape from STL: a clump template of its own, with the geometry able to come from an STL file.
  • Preview: see the final shape in pre-processing, without the spheres showing, before running.
  • Time step: the criterion accounts for the clump geometry.
  • Validated between the CPU and GPU solvers with a series of reference cases.
FeatureWith clumps
Rolling resistance (EPSD)Yes
Size distribution (PSD)Yes
Coarse-grainingYes
Wear (Archard + Oka)Yes
Automatic calibrationYes
CPU and GPU solverValidated
Sketch tools
LineRectangleCircleArcPolygon
3D operations
ExtrudeRevolveSweepCut
Booleans & patterns
UnionSubtractIntersectLinear patternCircular patternVortexization
Ready-made equipment
SiloMixerChuteDrumRibbon mixerPaddle mixer
Modeling

Sketch: draw the geometry without leaving BrixDEM

A parametric 2D→3D modeler built into the solver. Sketch the equipment with lines, arcs, circles and polygons, apply constraints and generate the solid straight into the simulation domain — with no external CAD.

  • Sketch primitives: line, rectangle, arc, circle and polygon.
  • Geometric constraints: horizontal, vertical, parallel, perpendicular and equality.
  • 3D operations: extrude, revolve, sweep and cut from the profile.
  • Boolean operations (union, subtract, intersect) and linear and circular patterns.
  • Parameter-driven equipment: silo, mixer, chute, drum, ribbon mixer and paddle mixer.
Geometry pipeline
  • Import of CAD and meshes (common surface formats).
  • Cleanup and repair: removing holes, degenerate faces and duplicates.
  • Inspection: dimensions, normals and watertightness.
  • Transforms: move, rotate, scale and position in the domain.
Import & cleanup

Simulation-ready geometry, no rework

Bring the equipment from your CAD and get it solver-ready. BrixDEM cleans, repairs and inspects imported geometry to avoid particle leaks and incorrect contacts.

Import Cleanup Repair Inspection
Test protocolCalibrated parameter
Single-particle rebounde_n · restitution
Inclined planeμ_pw · particle–wall friction
Angle of reposeμ_pp · μ_roll
Calibration

Material calibration automation

Fit material parameters to real physical tests. Choose the protocol, enter the experiment measurement and BrixDEM estimates the parameter and builds the calibration case automatically, ready to run.

  • Rebound test: estimates the restitution coefficient e_n from the rebound height.
  • Inclined plane: estimates the particle–wall friction μ_pw from the sliding angle.
  • Angle of repose: estimates μ_pp and μ_roll from the granular pile formed, with robust and repeatable angle detection.
  • Test variables (geometry, material quantity, duration) are part of the case and can be changed and re-run without rebuilding it.
  • Cohesion tuned coherently with the chosen test protocol.
  • Live preview of the estimate and automatic creation of the calibration case.
Wear

Abrasion and impact wear maps

Predict where equipment wears out. BrixDEM accumulates wear directly on the geometry mesh — depth per triangle — from two established models, ready to pinpoint hot spots in chutes, drums, bucket-wheels and elevators.

  • Abrasive wear — Archard: sliding wear accumulated per triangle, with W = K/H (collapses the Archard coefficient K and hardness H — only the ratio matters).
  • Impact wear — Oka (2005): particle impact erosion on the wall, controlled by the Oka K.
  • Wear coefficients per particle × wall (STL) pair; an empty field inherits the global value. Accepts scientific notation (e.g., 1E-9).
  • Off by default to avoid adding solver cost — enable it when you need the wear map.
ModelMechanismCoefficient
ArchardAbrasion / slidingW = K/H [1/Pa]
Oka (2005)Impact / erosionOka K

Wear is depth per triangle (volume/area): peaks depend on the mesh discretization — finer meshes produce larger local maxima. To compare cases, use the same mesh.

Abrasion wear Impact wear Per-pair coefficients
Motion

Free-body dynamics (6-DOF)

Beyond prescribed motion, a part can move from the forces the material itself applies to it. That is six degrees of freedom: three of translation and three of rotation.

  • The part responds to the forces and torques of the granular material, instead of following an imposed trajectory.
  • It works alongside the prescribed motions: rotation, translation and belt.
  • Locked on restart, so the setup cannot change midway through a resumed simulation.
Motion modeWhat drives the motion
Prescribed rotationthe rotation you enter
Prescribed translationthe velocity you enter
Beltthe belt speed
Free body (6-DOF)the forces and torques from the material
Capabilities

Everything the solver delivers

GPU (CUDA)

Massive acceleration on NVIDIA cards for millions of particles.

Multicore

Parallelization across all CPU cores to make the most of the workstation.

Large models

Support for high particle counts for full-scale equipment.

Multi-sphere particles

Clumps with ready-made types and shape from STL, with calibration, PSD and wear.

Free body (6-DOF)

Parts that move from the material forces, in six degrees of freedom.

Sketch

2D→3D modeler with booleans and linear and circular patterns.

Import & cleanup

Import CAD/meshes, repair and inspect geometry before simulating.

Custom materials

Material library and interactions defined per pair, with calibration.

Continuous mass flow

Injection at a constant mass rate with particle size distribution (PSD), held throughout the simulation.

Size distribution

Size distribution with multiple radii to represent real materials.

Coarse-graining

Linear scaling model to simulate full-scale equipment in workable machine time.

Solver switching at runtime

Change the solver from the interface while the simulation runs, with no case rebuild.

Rendering and video

High-quality images and videos, with adjustable light azimuth, elevation and ambient light.

Advanced export

Time series, fields, images and data for post-processing and reports.

Wear (Archard + Oka)

Abrasion and impact wear maps, per triangle, with per-pair coefficients.

See the solver in action

Download the free edition and explore the contact models and Sketch on your own equipment.