Home · Learn · Tutorials

Video tutorials

Learn BrixDEM 1.7 hands-on, following the solver and the geometry modeler — from setup to result.

Official tutorials

Start here

Quick start · BrixDEM

Tutorial 01 — Getting started with BrixDEM

From the interface to the first simulation: materials, geometry, run and results.

Modeling · Sketch

Tutorial 01 — Geometry modeling with Sketch

Draw the profile, apply constraints and generate the 3D solid to simulate.

Calibration · Materials

Tutorial — Material calibration

Fit restitution and friction from tests (rebound, inclined plane, angle of repose).

Equipment tutorials

Step by step, equipment by equipment

Narrated tutorials that build a complete case, from geometry to result.

T1 · Mixer

Double-cone mixer

Build a double-cone mixer and assess charge homogenization.

T2 · Drum

Rotary drum with lifters (ball mill)

Simulate the charge regime and lifter motion in a rotary drum.

T3 · Elevator

Bucket elevator

Build a bucket elevator and see filling, lifting and discharge.

T4 · Clumps & 6-DOF

Multi-sphere particles with free body

Build a case with multi-sphere particles (clumps) and free-body dynamics, using the workflow updated for version 1.7.

T5 · Silo

Industrial silo: filling and discharge

Build a complete silo, from drawing the geometry to reading the results, and simulate the two operations that matter: filling and discharge.

Demonstrations

The solver across different equipment

Grinding

Ball mill

From cascading to cataracting: reading the grinding charge motion.

Stockyard

Bucket-wheel reclaimer

Bucket filling, wheel forces and wear in stockpile reclaiming.

Transfer

Transfer chute

See the material trajectory, impact points and localized wear.

Mixers

Mixer

Mixing homogeneity and segregation by size and density.

Mixers

V-blender mixing

Follow the homogenization and segregation of the charge in a V-blender.

Vertical transport

Bucket elevator

Bucket filling, lifting and discharge, with carry-back and spillage.

Calibration

Angle of repose

Classic calibration test: the resulting pile estimates the material's friction.

Suggested path

Where to start

1

Install

Install and activate your free license.

2

Materials

Set density, restitution and friction.

3

Geometry

Draw in Sketch or import the CAD.

4

Results

Run, analyze and export.

Ready-made cases

Nine projects to open and run

The example case pack ships with BrixDEM and brings each piece of equipment already set up. Open it, run it and use it as a starting point for your own case.

🎯

Angle of repose

Calibration test for particle-particle friction.

⚙️

Ball mill

Cascading charge, impact energy and power.

⬆️

Bucket elevator

Bucket filling and discharge.

⚙️

Bucket-wheel reclaimer

Reclaiming material from a stockpile.

🌀

Screw conveyor

Throughput, fill and shaft power.

🔄

Rotary valve

Pocket dosing, torque and wear.

〰️

Ribbon mixer

Material mixing and mixture quality.

⛓

Drag chain conveyor

Drag by flights and residence time.

🧩

Clumps with 6-DOF

Multi-sphere particles and free body, new in 1.6.

Download the case pack

Ready to build your first model?

Download BrixDEM and follow Tutorial 01 with the software open.