CHAPTER 26
Installation Guide and First Steps
System requirements, installation of components, first run and environment verification.
BrixDEM is distributed as an application for 64-bit Windows. It gathers, in a single package, the graphical interface (pre- and post-processing, 3D visualization) and solver (DEM calculation core), in CPU variants and - when there is compatible hardware - GPU.
26.1 System requirements
| COMPONENT | MINIMUM | RECOMMENDED |
|---|---|---|
| Operating system | 64-bit Windows 10 | 64-bit Windows 11 |
| RAM | 8 GB | 16–64 GB depending on particle count |
| Processor | 4 cores | 8–32 cores (more cores can accelerate CPU execution) |
| Video | Standard graphics card | Dedicated GPU for smooth 3D viewing |
| GPU for the GPU solver (optional) | — | NVIDIA GPU with CUDA 13 or higher compatible driver |
| Disk | SSD with several GB of free space | SSD; large cases generate many snapshots |
When do I need a GPU? - GPU is optional. The 3D interface runs on any modern video card. The GPU solver (CUDA backend) is only required for very large cases and requires a NVIDIA GPU with recent driver (compatible with CUDA 13+). For most validation and calibration cases, the CPU solver is sufficient and often faster (see Chapter 27).
26.2 Step-by-step installation
- Copy the application folder to a short path without accented characters (e.g.:
C:\BrixDEM). Avoid protected areas likeProgram Filesduring evaluation; - For the GPU solver, install/update NVIDIA driver to a version compatible with CUDA 13 or higher. The required CUDA runtime is supplied with the solver - no need to install CUDA Toolkit separately;
- Run the application
BrixDEM.exe. On first launch, Windows may ask you to confirm an application from an unknown publisher; allow it; - Check the status of the license on License › Status (Appendix D lists what to send to support).
26.3 Package contents
| COMPONENT | FUNCTION |
|---|---|
| BrixDEM (app) | Graphical interface: design, geometry, materials, execution and post-processing |
| CPU solver | DEM calculation core parallelised on the CPU (OpenMP, multi-thread) |
| GPU solver (CUDA) | NVIDIA GPU-accelerated calculation core for large cases |
26.4 First execution and verification
To confirm that everything is working, run Tutorial 1 — Double-cone mixer (Chapter 21): a small case built entirely in the GUI that runs in a few minutes on CPU. If the simulation finishes with the message " SIMULATION COMPLETED SUCCESSFULLY!" and the 3D Particles tab shows the colored particles, the environment is ready.
If something doesn't open - Black 3D viewport or video error → update the graphics driver. GPU solver failed to start → use the backend CPU (Setup) and update the NVIDIA driver to a CUDA 13+ compatible version; not every computer has an NVIDIA GPU, and using CPU is perfectly normal.
