3D Visualization
Geometry, domain and surface display tab with camera and scene controls.
14.1 3D View Tab
The tab 3D Visualization uses the Helix/WPF engine to render geometries, domain and surfaces in high interactive quality. It is mainly used in pre-processing - during execution, the 3D particles tab displays the simulation state.
14.2 Camera controls
To the right of 3D View, a control column adjusts the camera and scene:
| BUTTON | FUNCTION |
|---|---|
| 3D | Standard isometric view |
| XY / XZ / YZ | Orthogonal views aligned with coordinate planes |
| Reset | Reposition the camera to view the whole scene |
| Edges STL | Show/hide STL mesh triangulation (checks density and normal) |
| Settings | Opens the scene settings panel |
Use orthogonal views to check alignment, scale and direction of normal in planes. Reset is useful when the camera becomes “lost” when exploring complex geometries.
14.3 Scene Settings
The display configuration panel allows you to adjust: background color (gradient, solid, dark/light); surface opacity (useful to see particles inside closed geometries); saved cameras (storage positions/reuse orientations); movement style (orbit, pan, smoothed zoom); time text (physical time overlay during animation); and playback speed and recording parameters.
Scene lighting
Lighting has its own section under Camera and movement, and it is what separates a readable scene from a flat one. The key light is positioned in spherical coordinates rather than by an XYZ vector:
| FIELD | DEFAULT | WHAT IT DOES |
|---|---|---|
| Light azimuth (°) | 35 | Horizontal angle; positive = light coming from the right |
| Light elevation (°) | 30 | Vertical angle; positive = light coming from above |
| Ambient light (0–1) | 0.45 | Uniform base illumination that fills the shadows |
| Key light (0–1) | 1.0 | Key light intensity — this is what creates the gradient |
| Fill light (0–1) | 0.5 | Fill opposite the key, softening the dark side |
| Key light follows the camera | on | With this on, azimuth and elevation are relative to the camera; off, they are absolute in the Z-up world |
14.4 STL edges
The button STL edges allows viewing the triangulation of the mesh. Use to check the mesh density (dense enough to capture curvature?), visual quality (very elongated or degenerate triangles?) and openings or non-manifold mesh regions (visible boundary edges indicate an open STL).
14.5 Ruler and Clip
3D ruler: click the 📏 icon in the viewport toolbar, select two points and read the distance overlaid on the scene. This is a viewing tool; it does not change geometry or the solver.
Visual clip: in Scene Settings, enable the clipping plane, choose particles, STL/surfaces or both, and enter a point and plane normal. Use the clip to inspect silo or bed interiors; it does not remove particles or change contacts. Disable clipping to restore the full view.
14.6 Orthographic and perspective projection
In 3D Visualization, P and O switch between perspective and orthographic projection. The switch preserves framing and orientation. Dragging follows the face axis while accounting for camera and zoom; Esc cancels. Field of view is kept consistent between the WPF window and SharpDX renderer.
