CHAPTER 2

Core Concepts

The entities of a case, the contact model and the configuration hierarchy.

2.1 Entities of a simulation

A case in BrixDEM consists of entities that interact with each other during temporal integration:

  • Particles - spheres with mass, radius and material properties; they are the central objects of DEM;
  • Geometry - walls, equipment and obstacles, imported as STL or created as primitives/Sketch;
  • Materials - intrinsic properties (density, Young's modulus, Poisson) of particles and walls;
  • Interactions - contact behaviour (model, restitution, friction, cohesion);
  • Insertions/removals — inlets injecting particles and outlets removing them;
  • Domain - the 3D region in which the simulation exists and the contact search system operates.

2.2 Contact model

The contact model translates the numerical overlap between two bodies into forces and torques. The models available in BrixDEM are Hertz–Mindlin (nonlinear, recommended for physical fidelity) and Linear Spring–Dashpot (linear, recommended for calibration and production). The models are detailed in Chapter 3.

Good practice - Start a new case with Linear Spring–Dashpot. It is more predictable, generates fewer numerical surprises and allows studying the sensitivity of the case. Advance to Hertz–Mindlin when you need additional fidelity in elastic contacts.

2.3 Anatomy of a DEM case

The particles live within the computational domain, interact with imported (STL) or primitive surfaces, and can be injected through inlets and removed through outlets. Geometry may have prescribed motion (translation or rotation), and gravity acts on all particles.

2.4 Configuration hierarchy

BrixDEM organizes a case in layers. Each layer accumulates information about the previous one; the panel Navigation (left) follows exactly this order:

LAYER WHAT IT DEFINES WHERE IT IS CONFIGURED
Project Working folder, paths and file organization File Menu
Geometry Walls, obstacles, equipment Geometry › STL / Surfaces
Material Density, E, ν of particles and walls Materials
Interaction Contact model and friction coefficients for each material pair Materials › Interactions
Insertion Where and at what rate the particles appear or are removed Insertion
Setup Δt, gravity, parallelism, CPU/GPU backend Settings
Results What to record and how often Results
Particle-wall contact - Fixed walls do not receive acceleration in the solver. Thus, the effective mass and radius of contact are reduced to the side of the particle (see Chapter 3).