APPENDIX F
Bibliographic References
Primary sources of the physical and numerical models of BrixDEM, cited throughout the guide (theory, wear, mixing and validation).
The following references are cited in brackets throughout the guide - in theory (Chapter 3), wear (Chapter 29), mixing indices (Chapter 16) and validation (Chapter 18). They are primary sources from the scientific literature: articles and books that established each contact model, cohesion, rolling/torsional resistance, wear, mixing and stability criterion implemented in BrixDEM.
DEM Foundations and elastic contact
- Cundall, P. A.; Strack, O. D. L. (1979). A discrete numerical model for granular assemblies. Géotechnique 29(1), 47–65. DOI: 10.1680/geot.1979.29.1.47.
- Hertz, H. (1882). Über die Berührung fester elastischer Körper. Journal für die reine und angewandte Mathematik 92, 156–171.
- Mindlin, R. D. (1949). Compliance of elastic bodies in contact. Journal of Applied Mechanics 16, 259–268.
- Mindlin, R. D.; Deresiewicz, H. (1953). Elastic spheres in contact under varying oblique forces. Journal of Applied Mechanics 20, 327–344.
- Tsuji, Y.; Tanaka, T.; Ishida, T. (1992). Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe. Powder Technology 71, 239–250.
- Di Renzo, A.; Di Maio, F. P. (2004). Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes. Chemical Engineering Science 59, 525–541.
Cohesion and adhesion
- Johnson, K. L.; Kendall, K.; Roberts, A. D. (1971). Surface energy and the contact of elastic solids. Proceedings of the Royal Society of London A 324, 301–313.
- Derjaguin, B. V.; Muller, V. M.; Toporov, Y. P. (1975). Effect of contact deformations on the adhesion of particles. Journal of Colloid and Interface Science 53, 314–326.
- Parteli, E. J. R.; Schmidt, J.; Blümel, C.; Wirth, K.-E.; Peukert, W.; Pöschel, T. (2014). Attractive particle interaction forces and packing density of fine glass powders. Scientific Reports 4, 6227.
- Brilliantov, N. V.; Spahn, F.; Hertzsch, J.-M.; Pöschel, T. (1996). Model for collisions in granular gases. Physical Review E 53, 5382–5392.
- Coetzee, C. J.; Scheffler, O. C. (2023). Review: The calibration of DEM parameters for the bulk modelling of cohesive materials. Processes 11(1), 5.
Rolling and torsion resistance
- Ai, J.; Chen, J.-F.; Rotter, J. M.; Ooi, J. Y. (2011). Assessment of rolling resistance models in discrete element simulations. Powder Technology 206, 269–282.
- Iwashita, K.; Oda, M. (1998). Rolling resistance at contacts in simulation of shear band development by DEM. Journal of Engineering Mechanics 124(3), 285–292.
- Wensrich, C. M.; Katterfeld, A. (2012). Rolling friction as a technique for modelling particle shape in DEM. Powder Technology 217, 409–417.
- Marshall, J. S. (2009). Discrete-element modeling of particulate aerosol flows. Journal of Computational Physics 228, 1541–1561.
Numerical stability and temporal integration
- Thornton, C.; Randall, C. W. (1988). Applications of theoretical contact mechanics to solid particle system simulation. In: Satake, M.; Jenkins, J. T. (eds.), Micromechanics of Granular Materials, Elsevier, Amsterdam, 133–142.
- O’Sullivan, C.; Bray, J. D. (2004). Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme. Engineering Computations 21, 278–303.
- Thornton, C. (2015). Granular Dynamics, Contact Mechanics and Particle System Simulations. Springer, Particle Technology Series, vol. 24.
- Verlet, L. (1967). Computer “experiments” on classical fluids. I. Thermodynamical properties of Lennard-Jones molecules. Physical Review 159, 98–103.
- Schäfer, J.; Dippel, S.; Wolf, D. E. (1996). Force schemes in simulations of granular materials. Journal de Physique I France 6, 5–20.
- Zhou, Y. C.; Wright, B. D.; Yang, R. Y.; Xu, B. H.; Yu, A. B. (1999). Rolling friction in the dynamic simulation of sandpile formation. Physica A 269, 536–553.
- Walton, O. R.; Braun, R. L. (1986). Viscosity, granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks. Journal of Rheology 30(5), 949–980.
Wear and mixing indices
- Archard, J. F. (1953). Contact and rubbing of flat surfaces. Journal of Applied Physics 24(8), 981–988.
- Oka, Y. I.; Okamura, K.; Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact. Part 1: Effects of impact parameters on a predictive equation. Wear 259, 95–101.
- Lacey, P. M. C. (1954). Developments in the theory of particle mixing. Journal of Applied Chemistry 4(5), 257–268.
- Maw, N.; Barber, J. R.; Fawcett, J. N. (1976). The oblique impact of elastic spheres. Wear 38(1), 101–114.
Coarse-graining
- Feng, Y. T.; Owen, D. R. J. (2014). Discrete element modelling of large scale particle systems — I: exact scaling laws. Computational Particle Mechanics 1, 159–168.
Industrial applications, power/torque and validation
- Cleary, P. W. (2009). Industrial particle flow modelling using discrete element method. Engineering Computations 26(6), 698–743.
- Marigo, M.; Stitt, E. H. (2015). Discrete Element Method (DEM) for industrial applications: comments on calibration and validation for the modelling of cylindrical pharmaceutical capsules. KONA Powder and Particle Journal 32, 236–252.
- Mellmann, J. (2001). The transverse motion of solids in rotating cylinders — forms of motion and transition behavior. Powder Technology 118, 251–270.
- Yamane, K.; Nakagawa, M.; Altobelli, S. A.; Tanaka, T.; Tsuji, Y. (1998). Steady particulate flows in a horizontal rotating cylinder. Physics of Fluids 10(6), 1419–1427.
Liquid bridges, breakage and quantitative verification
- Mikami, T.; Kamiya, H.; Horio, M. (1998). Numerical simulation of cohesive powder behavior in a fluidized bed. Chemical Engineering Science 53, 1927–1940. DOI: 10.1016/S0009-2509(97)00325-4.
- Nase, S. T.; Vargas, W. L.; Abatan, A. A.; McCarthy, J. J. (2001). Discrete characterization tools for cohesive granular material. Powder Technology 116, 214–223. DOI: 10.1016/S0032-5910(00)00398-3.
- Vogel, L.; Peukert, W. (2004). Determination of material properties relevant to grinding by practicable labscale milling tests. International Journal of Mineral Processing 74, S329–S338. DOI: 10.1016/j.minpro.2004.07.018.
- Shi, F.; Kojovic, T. (2007). Validation of a model for impact breakage incorporating particle size effect. International Journal of Mineral Processing 82, 156–163. DOI: 10.1016/j.minpro.2006.09.006.
- Tavares, L. M.; das Chagas, A. S. (2021). A stochastic particle replacement strategy for simulating breakage in DEM. Powder Technology 377, 222–232. DOI: 10.1016/j.powtec.2020.08.091.
- Tavares, L. M. (2022). Review and Further Validation of a Practical Single-Particle Breakage Model. KONA Powder and Particle Journal 39, 62–83. DOI: 10.14356/kona.2022012.
- Saghafian Larijani, R.; Magnanimo, V.; Luding, S. (2025). A Coarse-Grained Discrete Element Model (CG-DEM) based on parameter scaling for dense wet granular system. Powder Technology 453, 120581. DOI: 10.1016/j.powtec.2024.120581.
- Chan, E. L.; Washino, K. (2018). Coarse grain model for DEM simulation of dense and dynamic particle flow with liquid bridge forces. Chemical Engineering Research and Design 132, 1060–1069. DOI: 10.1016/j.cherd.2017.12.033.
- Lian, G.; Thornton, C.; Adams, M. J. (1993). A theoretical study of the liquid bridge forces between two rigid spherical bodies. Journal of Colloid and Interface Science 161, 138–147.
- Willett, C. D.; Adams, M. J.; Johnson, S. A.; Seville, J. P. K. (2000). Capillary bridges between two spherical bodies. Langmuir 16, 9396–9405.
- Pitois, O.; Moucheront, P.; Chateau, X. (2000). Liquid bridge between two moving spheres: an experimental study of viscosity effects. Journal of Colloid and Interface Science 231, 26–31.
